Cabela's 08-3201 Instruction Manual download pdf (Page 5)

-5--8-

ASSEMBLY INSTRUCTIONS

BE SURE TO FOLLOW ALL SAFETY WARNINGS

AND PRECAUTIONS THAT ARE CONTAINED

IN YOUR GRINDER INSTRUCTION MANUAL

BEFORE USING THE CUBER/TENDERIZER

ATTACHMENT WITH THE ELECTRIC

GRINDER! NEVER LEAVE THE MACHINE

UNATTENDED!

PRIOR TO FIRST USE: Disassemble the Cuber/

Tenderizer and hand wash each part in warm, soapy

water. Rinse with clear water. Dry thoroughly before

re-assembling. WARNING! This will expose the

Cutting Blades. ALWAYS wear cut-resistant gloves

when handling the Blade assembly.

1. If the Shaft Adapter is not already attached to the

Cuber/Tenderizer attachment, loosen the Set Screw

on the Shaft Adapter using the supplied Allen Wrench.

Slide the Shaft Adapter onto the Driving Blade Rack

Shaft and tighten the Set Screw. DO NOT over tighten.

Figure 1

2. To install the Chute onto the Top

Housing, remove the Top Housing from

the Lower Housing. Secure the Chute to

the Top Housing using the two Screws and

Lock Washers. DO NOT over tighten.

3. Insert the Driving Blade Rack into the

Lower Housing, guiding the Drive Shaft

into the bearing journals. NOTE: When

installing the Blade Rack Assembly, you

must position the drive shaft with the Shaft

Adapter through the hole in the Electric

Grinder Adapter before seating into the

bearing journals. Figure 2

4. Install the Driven Blade Rack

into the Lower Housing making

sure the teeth on the Driving Blade

Rack are properly meshed together

with the teeth on the Driven Blade

Rack.

5. Position the Top Housing onto

the Lower Housing and line up the

screw holes.

6. Secure the Top Housing to the

Lower Housing using the Housing

Thumbscrews. DO NOT over

tighten.

Shaft Adapter

Figure 1

Electric Grinder Adapter

Adapter Mountig

Bolts

Shaft

Adapter

Set Screw

Combs

Top Housing

Lower Housing

Thumbscrew

Blade

Assembly

Driving Blade

Driven Blade

Chute

Electric Grinder

Adapter

Figure 2

WARNING! Before cleaning, assembling or disassembling the Cuber/

Tenderizer Attachment make sure the PLUG of the GRINDER IS REMOVED

FROM THE OUTLET/POWER SOURCE! ALWAYS unplug the grinder when

not in use.

DIRECTIONS FOR USE

BE SURE TO FOLLOW ALL SAFETY WARNINGS

AND PRECAUTIONS THAT ARE CONTAINED IN

YOUR GRINDER INSTRUCTION MANUAL BEFORE

USING THE CUBER/TENDERIZER ATTACHMENT

WITH THE ELECTRIC GRINDER! NEVER LEAVE

MACHINE UNATTENDED!

Make sure the Cuber/Tenderizer is fully assembled and

correctly attached to the electric grinder.

Remove all bones or hard items in the meat before tenderizing or cubing. Damage

to the unit may occur if bones or hard objects are pushed through.

Do not cube or tenderize meat that is more than 1” (2.5 cm) thick. Thicker meat

may get lodged in Blades, which may cause damage to the product.

Use Tongs to insert the meat to be tenderized or cubed into the mouth of the

Chute until the meat comes in contact with the Blades. The meat will be pulled

through the unit by the Blade movement.

If a piece of meat is too short to reach the Blades, use the provided Tongs to

guide the meat to the Blades.

CAUTION! DO NOT press or push the meat into the Chute with your fingers or

any other object. Doing so may cause personal injury and/or damage to the unit. DO

NOT push the Tongs or other utensils into the Blades.

It may be necessary to pass the meat through the Cuber/Tenderizer several

times to obtain the desired results. You may also pass the meat through at different

angles if a different result is desired.

When finished tenderizing or cubing the meat, turn off the electric grinder and

unplug it from the power source.

Clean the unit before and after each use.

•

WARNING! Before cleaning, assembling or disassembling the Cuber/

Tenderizer Attachment make sure the PLUG of the GRINDER IS REMOVED

FROM THE OUTLET/POWER SOURCE! ALWAYS unplug the grinder when

not in use.

1 2 3 4 5 6

Comments to this Manuals

No comments

Cabela's 08-3201 Instruction Manual Page 5

Comments to this Manuals

Related products and manuals for Mincers Cabela's 08-3201