Cabela's 08-3201 Instruction Manual download pdf (Page 4)

-4- -9-

GENERAL SAFETY RULES

READ AND FULLY UNDERSTAND ALL INSTRUCTIONS

AND WARNINGS PRIOR TO USING THIS PRODUCT.

YOUR SAFETY IS MOST IMPORTANT! FAILURE TO

COMPLY WITH PROCEDURES AND SAFE GUARDS

MAY RESULT IN SERIOUS INJURY OR PROPERTY

DAMAGE. REMEMBER: YOUR PERSONAL

SAFETY IS YOUR RESPONSIBILITY!

WARNING!

SAVE THESE INSTRUCTIONS!

Refer to them often and use them to instruct others.

1. NEVER REACH INTO the Cuber/

Tenderizer. Doing so could cause serious

injury. ALWAYS USE THE PROVIDED

TONGS.

2. DO NOT push the Tongs or other utensils

into the Blades.

3. NEVER use fingers to scrape food away

from the Cuber/Tenderizer while the grinder

is in operation. SEVERE INJURY MAY

RESULT.

4. KEEP FINGERS CLEAR OF THE BLADES

AT ALL TIMES. Failure to do so may result in

personal injury. The Cutting Blades/Blade

Assembly is very sharp. It is recommended

to wear Kevlar, cut resistant gloves when

handling the Blades.

5. DO NOT press or push meat into the Chute

with your fingers or any other object. Doing

so may cause personal injury and/or damage

to the unit.

6. NEVER LEAVE THE Cuber/Tenderizer

UNATTENDED. Be safe, DISCONNECT the

Grinder from power source before leaving the

work area. Close supervision is necessary

when any appliance is used near children. This

appliance is NOT to be used by children.

7. FOLLOW ALL MANUFACTURER’S

INSTRUCTIONS AND SAFETY GUIDELINES

for operating the grinder.

8. NEVER use any accessories or parts from

other manufacturers. Doing so will VOID YOUR

WARRANTY and may cause fire, electrical

shock or injury.

9. Thoroughly clean all parts that will come

into contact with food before using the

Tenderizer/Cuber. Wash all parts by hand

and dry thoroughly. WARNING! Protective/

cut-resistant Kevlar gloves are recommended

when handling the blade assembly.

10. DO NOT attempt to tenderize meat with

bones or other hard items. Damage to the

machine will occur.

DISASSEMBLY & CLEANING INSTRUCTIONS

1. ALWAYS disconnect the grinder from the power source

before attempting to disassemble or clean the Cuber/

Tenderizer.

2. Keep children at a safe distance from unit while cleaning or

operating.

3. Remove the Cuber/Tenderizer from the grinder.

4. Remove the Combs from the Top Housing by lifting up on Combs. Figure 6

5. Remove the two Thumbscrews from the Top Housing. Set aside.

6. Remove the Top Housing. WARNING! This will expose the Cutting Blades.

Always wear cut-resistant gloves when handling the Blade assembly.

7. Using the provided

Allen Wrench, remove the Screws to remove Chute from

the Top Housing. Set the Screws and Lock Washers aside.

8. Carefully lift the Blade Rack Assembly from the Lower Housing.

9. Wash all parts thoroughly with warm,

soapy water. Rinse with clear water. A

long bristle brush is recommended for

cleaning the Blade Rack Assembly.

Always wear cut-resistant gloves when

handling the Blade assembly.

10. Dry thoroughly before re-assembling.

NOTE: It is highly suggested to coat all

metal parts with a food-grade silicone spray

(sold separately) to prevent corrosion.

11. TIE BACK loose hair and clothing, and roll

up long sleeves before operating the Cuber/

Tenderizer. REMOVE ties, rings, watches,

bracelets, or other jewelry before operating the

Cuber/Tenderizer.

12. WEAR EYE PROTECTION. Wear safety

glasses. Everyday eye glasses are not safety

glasses. Safety glasses conform to ANSI Z87.1

requirements. Note: approved safety glasses

have Z87 printed or stamped on them.

13. DO NOT use outdoors.

14. DO NOT use the Cuber/Tenderizer while

under the influence of drugs, medications or

alcohol.

Combs

Top Housing

Lower Housing

Thumbscrew

Blade Rack

Assembly

Chute

Electric Grinder

Adapter

Figure 6

WARNING! Before cleaning, assembling or disassembling the Cuber/

Tenderizer Attachment make sure the PLUG of the GRINDER IS REMOVED

FROM THE OUTLET/POWER SOURCE! ALWAYS unplug the grinder when

not in use.

1 2 3 4 5 6

Comments to this Manuals

No comments

Cabela's 08-3201 Instruction Manual Page 4

Comments to this Manuals

Related products and manuals for Mincers Cabela's 08-3201